Building Energy Management System as the Energy Saving Solution #1

WHY BUILD ENERGY MANAGEMENT SYSTEM 

Building Energy Management Systems is very important because energy is primary human needs, we must pay special attention to the use of the energy sector. In everyday use at home, there are many inefficient energy usage. Often discard energy  Whereas in energy generation we spend so much  resources.

Due to the use of improper, then we tend to be wasteful of energy. For example in the use of lights at home. Air Conditioner usage at home or in office buildings, or utility usage is not optimal in a factory. Such conditions can not be allowed to continue because the longer the energy resources become increasingly scarce and limited. Then it became a conclusion that the management of energy consumption, or Energy Management System is an Energy Saving Solution.

Energy Saving Solution and and Building Energy Management System

Energy Saving Solution does not have to be a sophisticated equipment. Also do not have to be operated by people who are smart. Energy Saving Solution can also be a procedure or Energy Management Systems. Is the Energy Management System? Building Energy Management Systems is a method or methods of management and use of appropriate and efficient energy as needed. Covering the energy consumption data collection, analysis of energy consumption, improvement of energy usage procedures, improvement of energy-intensive equipment, energy-efficient equipment selection and learning or training awareness about saving energy consumption.

Who Can Build Energy Management Systems

Building and Implementation  of Energy Management System (EnMS) as an Energy Saving Solution can be done by yourself at your workplace, or you can also involve expert or consultant. The first thing you should do is you have to understand how the concept of Energy Management System works. Therefore, you must have knowledge in a way to get enough training about EnMS. Then socialize into the ranks of employees in the workplace at all levels. This must be done as early stage because it is not possible to apply EnMS alone because of EnMS is a management method that involves all parties without exception.

see next article:

Building Energy Management System as the Energy Saving Solution #2

Energy Saving Solution for Small Scale Wind Turbine

Proudly Introducing : "LENTERA ANGIN NUSANTARA"  , a Small Scale Wind Energy Generation Farm

48 Unit @500Wp Wind Turbine and 10pcs 100Wp PV , by Ricky Elson , sponsored by PERTAMINA INDONESIA.

Location : Dusun Tanarara, Sumba Timur. Pulau Sumba. Nusa Tenggara Timur to supply electricity for 80 families.

 

This new invention will be our energy saving solution in the future. Because we already had the knowledge how to build electricity energy converted from small wind energy. Also this kind very suitable for remote and isolate region. 

LENTERA ANGIN NUSANTARA is founded by Ricky Elson, a young scientist from Indonesia. His Invention will be our future of energy demand and also energy savings solution in future.

Ricky Elson

read also :
how to build energy management systems

Simple Energy Saving Solution at Home

Here are some tips that can be your energy saving solution at home. Therefore you can do  these easily  both at home and on the way to save energy and save money.

At home, you have the opportunity to save money and energy. Saving energy in the home means that you can save reduce national energy needs.The energy saving is very easy to do. Here are some ways you can do to save energy, without the cost and expense of light.
1. install thermostats that can be programmed so that the management of heating and cooling can be more efficient. 
2. turn off unused equipment when you leave home.
3. Some electrical equipment needs power off button for the standby mode, electrical appliances still consume power.
4. The use of curtains on the windows, so that no direct sunlight into the house.
5. The use of solar cell as an alternative power source. This solar cell can serve as a source of illumination during the day.
6. close the door or ventilation are rarely occupied so cold or hot air from the heater to reduce the energy consumption of the heater or air conditioner .
7. Insulate the pipes with air conditioning and heater pipes.
8. The bath using the shower because the shower using the shower needs a little water.
9. maintain regular AC that consume electricity sparingly.

1. Drive vehicle without speeding. Stable vehicle speed is likely to be fuel efficient. 
2. Maintain the air pressure in the wheels of the vehicle. Air pressure will make the vehicle speed is less inhibited and increase fuel consumption.
3. Maintaining the condition of the vehicle, the vehicle can save the vehicle maintained.Such practical ways to save energy in everyday life, especially at home. This could be the energy saving solution for our daily lives.

also read other article : another simple tricks energy saving solution

10 Quick Tips to Save More Electricity

10 Quick Tips to Save More Electricity

 Being energy-efficient and lowering your electric bill can save a few dollars each month, which adds up to extra money in your pocket. But how can we cut our electric bill without making major sacrifices or investing extra money to see some savings? Check out these 10 simple tips on how to lower your electric bills and save more money each month.

1. During warmer months, use appliances like the clothes dryer, dishwasher and oven in the morning or evening when it is cooler outside. Your AC will not have to work as hard to keep your home cooler than if you used them when outside temperatures are at their highest.
2. Purchase black out curtains to hang in windows that the sun comes in. 
3. Use night lights in kids bedrooms/bathrooms rather than leaving the lights on for them. This will ease their fear of the dark and light their way in the night if they need to get out of bed. 
4. Be sure to always turn off the lights in the room you’re leaving. Even if you think you’re coming right back, it’s best to conserve electricity while you’re not in the room!
5. Invest in a toaster oven to cook small dinners or sides. It’s easy to pop a casserole/dish in the toaster oven to cook instead of using the big oven. There's no need to warm up the whole oven when you only need to cook one thing.
6. Close the vents in rooms you rarely go in! Instantly you can reduce the square feet you have to cool or heat.
7. Cook meals in bulk. It’s very easy to double a recipe to create twice as much food and left overs for the next day. It will prevent you from having to heat up the oven all over again.
8. Baths use a lot more water than showers, which means a lot more electricity to heat the water. Take a shower instead and purchase a low-flow shower head to reduce water/electricity consumption even more.
9. Insulate your pipes. If your pipes are in an unheated garage or exposed beneath your house, insulate them with pipe-insulating foam. By adding insulation to pipes you will prevent them from freezing and the hot water pipes will stay warm. 
10. Use the low-wattage bulbs when you can. There’s no need to “over light” a room—Bright lights are handy for hallways and closets but the lamps in your family room can be a bit dimmer.